Out Of Stock
Brand: Elise-Spares
Model: Rebuilt PG1 Gearbox
5 speed PG1 close ratio gearbox B4 fully rebuilt using our own ratios:
1st- 3.167 ; 2nd - 1.842; 3rd - 1,308; 4th - 1.033; 5th - 0.848; Final drive - 4.2 (3.9 can alternatively be fitted if required)
Fully rebuilt using steel bearings throughout, all new seals etc.
Will fit any Lotus Eli..
£499.95
Out Of Stock
Brand: Elise-Spares
Model: Rebuilt PG1 Gearbox with Quaife LSD
5 Speed PG1 Close Ratio Gearbox B4 Fully Rebuilt with Quaife ATB Helical LSD Differential QDF28K
Fully Rebuilt Using Steel Bearings Throughout, All New Seals Etc.
Final Drive is 4.2.
Will fit any Lotus Elise or Exige with a Rover K Series Engine.
Fitting Available at our Workshop wit..
£1,290.00
Brand: Elise-Spares
Model: Clutch Hose
Lotus Elise S1 clutch hose.
Replaces standard red plastic hose.
High quality stainless steel...
£59.95
Brand: Elise-Spares
Model: S2 Clutch Hose
Lotus Elise Exige S2 clutch hose.
We have designed this hose to replace the existing steel hose and rubber flexy line. this runs directly from the clutch master cylinder to the slave cylinder.
In a race car application we have seen squashed steel pipe and the rubber flexy detiriorate especia..
£59.95
Out Of Stock
Brand: Competition Clutch
Model: CC CLUTCH ST2
The Competition Clutch stage 2 was designed for powerful, tuned road cars, but without all of the drawbacks of a heavy racing clutch.
Key Features.
Allows an increase in stock torque up to 80%.
Smooth engagement and an extended life with the Carbon Kevlar material.
A high per..
£335.00
Pre-Order
Brand: Borg & Beck
Model: BB CLUTCH ROV
Borg & Beck Clutch components are manufactured to exacting engineering standards. Rigorous testing procedures and a strict material control program ensure that the contents of a Borg & Beck clutch kit are always of OE Matching quality.
A traditional clutch kit is supplied with the 3 comp..
£109.95
Brand: SKF
Model: Release Bearing
Clutch release bearing to suit all PG1 gearboxes.
Genuine SKF item...
£24.95
Brand: Lotus
Model: A120Q7104S
Clutch release bearing to suit all 2ZR Toyota Engined Lotus Elise 2010 on
..
£149.95
Brand: Elise-Spares
Model: Release Bearing 2ZZ
Clutch release bearing to suit all 2ZZ Toyota Engined Lotus Elise or Exige Cars with 6 Speed Gearbox.
..
£49.95
Brand: Elise-Spares
Model: Con Rod Brg
Con rod bearing set for any Lotus Elise or Exige with the Rover K series engine.
High Quality, we fit these to all our rebuilt K series Engines...
£29.95
Hot
Brand: Elise-Spares
Model: Kevlar Crash Structure
Crash Structure remanufactured by ourselves using a Kevlar composite.
In our opinion this is stronger than the OEM item and would not hesitate to use it.They have not been crash tested at MIRA but have hit a wall at Spa at 60mph and the driver was unhurt with minor damage to the crash structure. Th..
£499.95
Brand: Elise-Spares
Model: Kevlar Crash Structure
Crash Structure remanufactured by ourselves using a Kevlar composite.In our opinion this is stronger than the OEM item and would not hesitate to use it.They have not been crash tested at MIRA but have hit a wall at Spa at 60mph and the driver was unhurt with minor damage to the crash structure. The ..
£599.95