Brand: Elise-Spares
Model: Toyota 2ZZ Engine Water Pump
Water Pump.
To suit all Toyota Powered Lotus Elise, Exige & 2-11.
..
£49.95
Brand: Elise-Spares
Model: Water Pump
Water pump to suit all Rover K Series engines
200 l/min flow rate..
£29.95
Brand: SKF
Model: S2/S3 2011 Onwards Wheel Bearing
Wheel bearing to suit all S2 1.6 Elise 2011-2014, and S3 Elise 2011-2017
Manufactured by SKF or NK who are OEM quality.
To fit later cars (1ZR & 2ZR) with the Bosch ABS..
£119.95
Brand: SKF
Model: S2 Wheel Bearing
Wheel bearing to suit all S2 models from 2001 including Exige and 211
Manufactured by SKF who are OE supplier to Lotus
This is the type with the sensor so fits all models with or without ABS..
£119.95
Brand: SKF
Model: Exige V6 Front
Wheel bearing to suit all Exige V6 2012 onwards - FRONT.
Exige V6's have different wheel bearings front and rear, this is front.
Manufactured by SKF who are the OE supplier to Lotus...
£109.95
Model: S1 Timken Wheel Bearing
Original Timken Bearing to Suit All Series 1 Lotus Elise & Exige..
£49.95
Model: Lotus Elise S3 Exige V6
Brand new OE wheel speed sensor extention harness.
Prone to breaking when removing and failing causing ABS faults.
Fit the following vehicles;
Elise S3 - Front and rear
Exige V6 - Front
Part number A120M6046F..
£29.95
Brand: Elise-Spares
Model: S2 Stud Kit 60mm
This kit converts the original Lotus Elise S2 wheel bolts to a stud and wheel nut setup
Ideal for quicker changing of wheels on track and a simpler solution to the original setup
Total Length 60mm
Stud Length 45mm
..
£39.95
Brand: Elise-Spares
Model: S2 Stud Kit 80mm
This kit converts the original Lotus Elise S2 wheel bolts to a stud and wheel nut setup
Ideal for quicker changing of wheels on track and a simpler solution to the original setup
Total Length 80mm
Stud Length 65mm
..
£39.95
Brand: Elise-Spares
Model: Wishbone Front Lower LH
Replacement wishbone for the front lower LH side
Manufactured by ourselves in round 2mm CDS steel (OE arms are also 2mm but use cheaper ERW steel)
Powder coated in black but any colour can be ordered at no extra cost
Bushes and ball joints are available pre installed from the drop ..
£179.95
Brand: Elise-Spares
Model: Wishbone Front Lower RH
Replacement wishbone for the front lower RH side
Manufactured by ourselves in round 2mm CDS steel (OE arms are also 2mm but use cheaper ERW steel)
Powder coated in black but any colour can be ordered at no extra cost
Bushes and ball joints are available pre installed from the drop ..
£179.95